Connect, turn, split and cap every line in the system. Twist lock compression fittings for 17mm and 20mm tubing, barbed fittings in 1/4, 1/2 and 3/4 inch, threaded adapters, goof plugs and bug caps.
Read moreRead less
TechLock fittings
TechLock couplers, elbows and tees lock onto 17mm and 20mm polyethylene tubing without clamps or glue, and they can be removed and reused when the layout changes. Male pipe thread adapters and combination tees connect a TechLock lateral to 3/4 inch threaded valves, filters and manifolds.
Barbed fittings
Barbed straight connectors, elbows, tees, crosses and plugs are available in 1/4 inch, 1/2 inch and 3/4 inch for vinyl and poly tubing. 5mm barbed elbows and barbed by threaded insert connectors handle the micro tubing end of the system.
Plugs and caps
Goof plugs seal a hole that was punched in the wrong place or is no longer needed. Bug caps cover open outlets to keep insects and debris out of the line.
Irrigation Fittings & Connectors FAQ
What fittings work with 17mm tubing?
Use 17mm TechLock couplers, elbows, tees and adapters. Fittings are sized to the tubing, so 20mm tubing needs 20mm fittings.
How do I fix a hole punched in the wrong spot?
Push a goof plug into the hole. It seals the tubing so the line can stay in service.
Do barbed fittings need clamps?
On low pressure drip lines a barbed fitting usually holds on its own. Add a hose clamp on larger vinyl tubing or where pressure is higher.
